Go to the SETTINGS menu by using the navigation button. Press the [wp-svg-icons icon=”list-2″ wrap=”i”] menu button to display the submenu. Scroll down and select INFORMATION. Select TYRE PRESSURE. Select RESET. Press and hold the OK button until a confirmation message appear on the screen. These instructions are based on the Ford Kuga Press the hazard light switch (red triangle) six times in a row. You should hear the horn sound afterward. Now, the board computer screen will say, “train left front tire.”. Now, remove the dust cap from the front left tire and push the Schroder valve with something thin to release tire pressure.
Step 2 – Press down the reset button, this can usually be found under the dash or to the side of the steering wheel (check your owner’s manual if you are unsure). Step 3 – Hold the button down until the TPMS light blinks several times. Step 4 – You can now fully turn the key in the ignition and start the engine.
Turn the key in the ignition so it clicks 2 times (NOT starting the car), then press down the gas and brake at the same time until the reset message comes up, hold them down until it says something like "Reset complete". specialpb • 1 mo. ago. Fill it and then drive on it. After about 10-20 minutes the light should go out.
Press the “OK” button. In the Personalisation, menu select Define the vehicle parameters. Press the “OK” button to confirm. select the Driving Assistance menu. Select Tyre pressures menu. Then select the Reinitialization menu. Press the “OK” button to confirm. For more details, please watch the following video: Find the correct tyre pressures for an Ford B-Max. Simply enter your vehicle registration or make and model. Toggle navigation TYRE PRESSURES. 2016. 2017. 2018. WNY. Hybrid Member. 151. Posted September 2, 2015 at 11:06 PM (edited) I believe there is a setting in the myview or on the display on selecting the Tire Mobility Kit service interval. 1,2,3 years, probably so the fluid fix stuff doesn't go bad to get it replaced. Not sure how long the stuff lasts if you don't use it.

Relearn Procedure when Resetting Air Pressure: 1. Inflate all tires to pressure listed on tire placard. 2. Turn the ignition to the ON position with the engine OFF. 3. Press forward/back button on the steering wheel until trip and odometer are displayed. 4. Press UP/DOWN button until tire pressure monitor is displayed.

For the 2019 2020 2021 model year, you can reset the TPMS through the cluster display. Follow these steps to do it: Stop the vehicle and turn off the engine. Adjust the cold tire pressure in all four tires recommended on the tire placard. Turn the ignition key to the “ON” position without starting the engine. vQebN8B.
  • t6s29djmri.pages.dev/845
  • t6s29djmri.pages.dev/133
  • t6s29djmri.pages.dev/820
  • t6s29djmri.pages.dev/228
  • t6s29djmri.pages.dev/27
  • t6s29djmri.pages.dev/204
  • t6s29djmri.pages.dev/571
  • t6s29djmri.pages.dev/939
  • t6s29djmri.pages.dev/742
  • t6s29djmri.pages.dev/265
  • t6s29djmri.pages.dev/351
  • t6s29djmri.pages.dev/96
  • t6s29djmri.pages.dev/176
  • t6s29djmri.pages.dev/868
  • t6s29djmri.pages.dev/532

    • ford c max 2016 tyre pressure reset